RCD-5310 adopts industrial design, good resistance to abrasion and corrosion, fit for high or low temperature and dusty environments. It has multiple card stay position , and channel is plastic material. Reserves card reading module install position.Simulation manpower friction card issuing makes most deformed card recognized. Active stacker installation space can let you manage cards more effective. Six shifts card space adjustment is our patented technology used for issuing cards with different thickness, and CNC precision ensures absolute unanimity of card space. Support Mifare 1 standard card read,write,issue.
Main functions:
1) Card empty and pre-empty detect function and sound alarm
2) Capturing card through a special card retrieving box.
3) Preventing dispensing double card simultaneously: Up gear and down gear swirl in different direction, and friction dispensing card can avoid dispensing double card at the same time, even suitable to some distorted cards.
4) Can issue all cards in the stacker in normal condition. Most distorted cards can be issued by using card holder.
5) Especially suitable for issuing thin paper cards, and card dispenser can also be set according to customers’ requirement.
6) Card thickness adjustment is convenient, precise and easy to operate.
7) RS232 control interface. may make multiple machine communication.
8) Pre-dispensing function accelerates the speed and ensures the continuous card issuing.
9) Read/write mifare 1 standard card.
Daily maintenance:
After card dispenser uses long period or dispenses a certain quantities of card, some part will have great abrasion through long time operation. Then it is necessary to maintain card dispenser. The procedure is as below:
1) Check if parts of card dispenser are loose or abnormal. If so, please fasten or repair immediately.
2) Check if the belts are loose. If so, please adjust the position of wheel.
3) Use cleaning card or soft cloth dipped with alcohol to clean up wheels at the bottom of card cabinet.
4) Pick out cards with greasy surface and distorted cards. Use soft cloth dipped with alcohol to clean cards with greasy surface. If distorted cards cannot be repaired, you need to change cards.
Caution:
1) When opening host machine or cabinet to repair, power connected with card dispenser must be shut off to avoid damage machine.
2) Be careful of the difference of power positive and negative in the first power-on.
3) Notice the jumping line explanation in the first use. Wrong jumping line may cause machine unable to work or uncertain status.
4) Forbid hot-plugging connecting socket in the port. Hot-plugging is easy to damage control circuit.
5) Keep card dispenser clean, no oil. Greasy binder may damage the performance of card dispenser greatly.
6) There is a red hand-operated soft reset button at the rear down position of card dispenser body side. Field operator can adjust by hand when there is error or abnormal condition in the field operation. In normal condition please do not use it.
7) Resetting button can be used to sort cards in stacker and reclaim cards hand-operated.
8) Resetting button has overtime protection. Hold and press the button, motor will stop operating automatically to protect motor.
Your message must be between 20-3,000 characters!