Product Description
13.56mhz High End Contactless Card Reader , Rfid Id :0-80mm module RS232/USB/TTL Automatic fare collection system
Overview
RCR-3300(formerly known as RFM-13X series) is a high-performance embedded RFID read-write module, read-write MIFARE1(S50 and S70) , ISO 14443A/B, ISO 15693 series cards, with a SAM slot, optional RS232/USB/TTL interface. Can be widely used in attendance system, access control, public transport and other terminal systems.
Interface
Main interface J1(6*2.0mm)
Used for RS232 and USB communication, Pin definition description:
Pin1 ---- GND
Pin2 ---- VCC (DC+5V)
Pin3 ---- GND
Pin4 ---- RS232.RX or RS485.B or USB.D+
Pin5 ---- RS232.TX or RS485.A or USB.D-
Pin6 ---- GND
Extended interface J2(8*2.0mm)
Used for TTL. Pin definition description:
Pin1 ---- VCC (DC+5V)
Pin2 ---- GND
Pin3 ---- TTL.RXD
Pin4 ---- TTL.TXD
Pin5 ---- GPIO0
Pin6 ---- GPIO1
Pin7 ---- Wiegand.D0
Pin8 ---- Wiegand.D1
Specification
Name: 13.56mhz RF card reader/ writer module
Read distance:0-80mm
High Light: contactless smart card reader writer,chip card reader and writer
| Voltage |
+5VDC (± 5%) |
| Current |
<120mA |
| Card type |
Read and Write Mifare1 (S50, S70) ,ISO14443A/B,ISO15693,Smart card |
| Distance |
Type A: 0~8cm,type B: 0~5cm,ISO15693: 0~10cm |
| Interface |
RS232/RS485, TTL, USB HID |
| Baud rate |
9600(default)~115200 BPS |
| Temperature |
Operating: 0°C ~ + 60°C Storage: -20°C ~ + 60°C |
| Humidity |
Operating: 5% ~ 95% RH Storage: 20 %~ 90% RH |
| Dimension |
100mm ( L ) x 50mm ( W ) x 10mm ( H ) |
Contactless card RCR-3300 product application
Automatic fare collection system
Power changing terminal
Card management system
Parking system
Access control system
Payment kiosk
Demension
Related knowledge
The basic function of a reader-a reader-consists of two parts: a software part and a hardware part.
1). The software part, these are the software that the manufacturer solidifies in the reader module when the crystal leaves the factory, is responsible for responding to the instruction received by the reader and issuing the corresponding action instruction to the electronic tag. The software section generally includes the following software.
1.control software: responsible for system control and communication, control antenna launch on and off, control the working mode of the reader and writer, complete the data transmission and command exchange between the host and other functions.
2.import software: mainly responsible for system startup import corresponding.
2)Hardware, from the hardware, the reader is composed of two basic functional blocks: control system and by the transmitter and receiver composed of high-frequency interface. In addition, the reader also needs to transmit electromagnetic energy antenna.
The control system usually adopts ASIC component and microprocessor to realize its function. In most cases, the control system takes the microprocessor as its core component, and accesses the ASIC through the register-oriented microprocessor bus.
Your message must be between 20-3,000 characters!