Magnetic RFID Hybrid Card Reader RS232 / USB / Bluetooth 4.0 With LED

    RCR-2600 LED card reader is the most advanced player card reader ever developed. It comes with reading the player ID from the dual track magnetic stripe or from an embedded RFID chip. It is the half-insertion magnetic & RFID card reader with RS232/USB/Bluetooth 4.0 interface for option. Magnetic & RFID integration support secondary development.,can realize a variety of functions such as automatic charging, card sales, business card printing, with practical, fast, convenient, high reliability characteristics.

 

               

 

Magnetic Card	Comply with ISO7810. It can read 60% of the magnetic stripe
RF Card	Comply with ISO1443-3/-4 standard with frequency of 13.56MHz; Contactless IC card (TYPE A, TYPE B, CPU card); Mifare S50/S70/UL/Plus card read/write.
Interface	RS232 / USB / Buletooth 4.0
LED	Controllable LEDs
Temperature	Operating: 0°C ~ + 60°C Storage: -20°C ~ + 60°C
Voltage inpu	DC 5.0±5% V /USB power supply
Current consumption	Static current: < 50 mA Peak current: < 200 mA

 

Features:

1) Magnetic & RFID card read/write

2) RS232 /USB /Bluetooth 4.0 for option

3) Compact and reasonable appearance design, easy disassembly and installation

4) RGB Mode: It can change LED mode and color by command, with three modes.

- Constant light mode: This mode can change LED color (Red, Green, Blue, Yellow, Purple, Cyan,White)

- Flashing mode: This mode can set the frequency and time to change the flicker effect.

- Gradient mode: This mode can be cyclically changed LED color in several colors, waiting for the card

 

Interface:

 

Maintenence:    

    There will be something dirty on IC card contact which will influence IC card reading and writing after using for a while. Therefore, we must make a certain maintenance for card reader. the specific procedure as below:

1) Using cleaning card to clean dirty things on IC contact.

2) Periodical maintenance: it needs to clean maintenance once when card in and out 20,000 times. (count once when card in and out.)

    Contact maintenance: it will cause IC card and contact touch error when there is dirty things on contact. It should clean the contact pin, the main method is that we use cleaning card with alcohol to clean card reader, make auto test IC card operation.

 

Notes:

1) Make sure power off in order not to damage the card reader when person maintains.

2) Keep card reader clean without any oil dirt.

3) IC card insertion direction: the chip of IC card upward, and insert card from the front.